Publicité
Les langues disponibles
Les langues disponibles
DMX PROTOCOL
9
10
11
12
13
14
15
16
Extend Channel:
17
18
19
20
SPECIAL INSTRUCTIONS
1. During the reset process, press and hold the 5 seconds "OK" button to interrupt
the reset.
2. Press and hold the "OK" key during power-on to interrupt the reset process and
enter test mode.
3. Signal indicator:
● The ERR red indicator flashes to indicate that there is an error message and
enters the "System Information" -> System Error" view information.
● DMX green indicator light, steady light indicates that the DMX signal is
received, and frequent off indicates no DMX signal.
000-127
Prism 1
128-255
000-127
128-190
Prism 1 Rotation
191-192
193-255
000-127
Prism 2
128-255
000-127
128-190
Prism 2 Rotation
191-192
193-255
Focus
000-255
000-127
7-Color Effect
128-255
000-127
Frost
128-255
000-049
050-099
Reset
100-199
200-255
Pan/Tilt Speed
Color Wheel Speed
000-255
Dimmer-Prism-Frost
Speed
Gobo Wheel Speed
Prism 1 out
Prism 1 in
Prism angle adjustment
Reverse rotation (from fast to slow)
Stop
Forward rotation (from slow to fast)
Prism 2 out
Prism 2 in
Prism angle adjustment
Reverse rotation (from fast to slow)
Stop
Forward rotation (from slow to fast)
Pattern definition from far to near
7-Color Effect out
7-Color Effect in
Frost out
Frost in
No Function
Small Motor Reset
Big Motor (Pan/Tilt) Reset
All Motor Reset
Speed from fast to slow
Publicité
