EGAmaster AQUAMASTER Manuel D'instructions page 53

Follow the procedure.
- Loosen the socket head screws item A and remove the cover item B (see fig. 4).
- Spray all moving parts with multi-oil-spray.
- Replace all sealings item C, re-assemble the cover and tighten the screws.
After completing maintenance and repair work and before restarting production make sure that...
- all materials, tools and other equipment which are required for maintenance or repairs have
been removed from the work area of the machine,
- any fluid leaks have been removed,
- all safety devices on the machine have proper function,
- fixtures of screw connections are tight,
- removed covers, screens or filters were reinstalled.
The employer ensures that all maintenance, inspection and assembly work is done by
authorized and qualified experts.
Maintenance and repair
Disassembly and re-assembly should be done according to the exploded views, respectively
the sectional drawings (see repair instruction).
All work regarding disassembly and re-assembly, as well as maintenance and repair have to
be executed by skilled staff only.
DANGER – Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool down to
the ambient temperature.
NOTICE – Special instructions apply for the repair of explosion-proof machines.
Retrofits or modifications of the machine need the manufacturer's acceptance.
The explosion-proof machine is designed in the type of protection "c" constructive
safety. All work executed on the machine, influencing the explosion protection, e. g.
repairs with mechanical machining, require an approval of an authorized expert or
have to be done by the manufacturer.
The internal structure must remain unmodified.
Fig.4
DISASSEMBLY - RE - ASSEMBLY
Item Qty. Description
A 4 Socket head screw
B 1
C 2
Cover
O-Ring
53