La Boite Concept LX X Notice D'utilisation page 68

5 . CAB LE CO NNECTION
OPTICAL: OPTICAL AUDIO DIGITAL INPUT
Use the optical input to connect your LX X to your TV, hard disk player, streaming player and
satellite or cable receiver. The optical input only works with PCM stereo, if a connected device
sends 5.1 audio (or similar surround sound), the LX X will not work. We recommend that you use
the optical input for the videos as this cable avoid the latency between image and sound.
To use this connection, you just have to :
1. Connect the optical audio cable to the optical audio input on your source.
2. Turn the LX X on.
3. Select Optical source by pushing the control knob.
RCA ANALOGUE INPUT
Use the RCA input for connecting your LX X to audio sources such as your mobile phone, music
player or tablet.
To use this connection, you need to :
1. Connect the audio cable provided to your LX X and to the audio output of your music device
(source).
2. Swap to RCA source by switching the button on the input panel.
3. Select RCA/Phono as source by pushing the Control knob until RCA/ Phono LED is illuminated.
AUXILIARY : 3.5 MM STEREO PLUG
Use the 3.5mm jack input to connect your LX X to audio sources such as your CD player or turn-
table (pre-amplified).
To use this connection, you need to :
1. Connect the audio cable to your LX X and the audio output of your music device (source).
2. Select AUX as source by pushing the Control knob until the AUX LED is illuminated.
68