La Boite Concept LX X Notice D'utilisation page 73

8. WHAT TO DO ?
1 . TO CLEAN YOUR LX X
Before cleaning the device, unplug your LX X from the power socket. Clean the device only with
a dry cloth. Do not use cleaning alcohol or solvents to clean the device's surface because these
could damage the painting and cause electrical failures or fire if they penetrate the device's
electronics.
2 . NO POWER
Make sure that the AC cable is solidly connected. Make sure that the plug is fully inserted in
the power socket and there is power. Check that the master ON / OFF located underneath the
loudspeaker (please refer to page 57) is positioned on "ON". Make sure that the LX X is not in
standby mode. Make sure that the device is switched on by checking the Bluetooth® white LED
on the top panel. (please refer to page 54).
3 . NO SOUND
Make sure that the volume is turned up to audible level and that the input source is at its max-
imum. Make sure that an available input source is selected (please refer to page Using your
LX X with your devices). Make sure that the LX X is not in standby mode. Check if the bluetooth
connection with your device is still active. Finally, if you still cannot hear any sound coming out of
the LX X, increase the volume (please refer to page 68).
4 . THE SOUND IS DISTORTED OR BUZZES
Check the connections of your music readers. Make sure that all the connecting cables are cor-
rectly plugged in, especially the earth/protection shield connections. Make sure that your cables
are in good condition.
5 . BACKGROUND NOISE AND UNDESIRABLE
INTERFERENCES
Separate the device from other electrical appliances which may be causing the interference. If
the above solutions do not remedy your problem, please contact a professional. Your home elec-
trical installation may be connected to earth ground or it may be polluted by electrical parasites
devices that implies audible noise. For any repairs during or after the warranty, please contact
your dealer.
73