Publicité
Les langues disponibles
Les langues disponibles
CARE AND CLEANING
CAUTION: Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns,
unplug the pump and allow time for it to cool after periods of extended use.
Do
When the power is disconnected, inspect the pump
suction screen and remove all debris, then plug the
pump back into the grounded (GFCI) outlet.
To clean a pump clogged with debris:
Unplug the pump from electrical power.
Unscrew the stainless screws, and remove the volute/bottom seal plate.
Unscrew the stainless screws, and remove the diffuser.
Use a flathead screwdriver to hold the shaft, then turn the impeller counterclockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.
6
Do Not
Do not disassemble the motor housing. This motor has
NO repairable internal parts, and disassembly may
cause leakage or dangerous electrical wiring issues.
Do not lift up the pump by the power cord.
For Professional Technical Support call 1-844-242-2475
Publicité
