Dometic eStore Instructions De Montage Et De Service page 21

eStore
➤ Enter in the field Pack Address the number of the eStore , e.g. "1" for the
master (fig. 9 1, page 5).
➤ Press "F2" or select in the menu "Connection" the command Connect
(fig. 8 6, page 5).
➤ Press the enter key.
➤ Enter in the field Total Pack Number the number of all eStores you want
to connect , e.g. "3" if you want to connect three eStores (fig. 9 2,
page 5).
➤ Press the enter key.
➤ Enter in the field Parallel Pack Number the number of all eStores you
want to connect , e.g. "3" if you want to connect three eStores (fig. 9 3,
page 5).
Note: total pack number and parallel pack number must be the same.
➤ Press the enter key.
➤ Enter the password 3331 (fig. 9 4, page 5).
➤ Press the enter key.
➤ Attach the ID label (fig. 9 5, page 5).
Note: The number of the last eStore must be identical to the total number
of eStore.
I
NOTE
For a more detail description of setup options with Dometic eCore,
Dometic MPC01, Waeco PerfectCharge MCA chargers and other
devices, please contact Dometic (see addresses on the back
page).
EN
Connecting eStore
21