Association With Webserver In Manual Mode - Airzone AZZBSWSCLOUDR Manuel D'installation

3. Finally, you must choose the type of configuration for the connection of the device
to the network: DHCP or Manual. The Cloud Webserver is configured in automatic
mode or connection by DHCP; if manual association is required, press the settings
icon, select the manual mode and change the required parameters: IP address,
subnet mask.
EN
The server's D12 LED will begin to blink in green if the Internet connection has been properly
established.
EN

Association with webserver in Manual mode

FR
IT
PT
DE
10
To complete the association process in Manual mode,
you must:
1. Enter the MAC and PIN of your Webserver
device on the screen that the app will display.
You can obtain this information in the following ways,
as indicated in the app's help icon
•
This information can be found on the back
cover of this user's manual.
•
On the Webserver device's information
sticker.
•
Via the Blueface master thermostat for
system 1 in your installation. In this case, access the
user menu, press Information and select Webserver to
view your device's MAC and PIN parameters.
•
Via the Think master thermostat for system 1
in your installation. In this case, access the system
advanced settings menu, press Information, and
select Webserver to view your device's MAC and PIN
parameters.
: