CLEANING AND MAINTENANCE
Cleaning
1
Always switch off and unplug when cleaning appliance.
Don't touch the sharp blades and keep special care when clearing blades avoid to be
injured
Some food easy discolor plastic part, please rub with a cloth dipped in vegetable oil
help remove discoloring.
Cleaning appliance body、chopper lid、whisk body
Wipe with a damp cloth, then dry
Never immerse in water or use abrasives.
Cleaning Wand、wire whisk
Unplug the power line, then take down the wand and whisk.
Wash the wand and whisk by water.
Use cloth to dry the water of wand and whisk.
Caution:
Never hold motor unit portion of hand blender under running water. Simply wipe clean with a damp
cloth.
If you put the wand and whisk into the water to clean, you must pay attention to the following two
aspects:
1. Height of water can't over the plastic part at top of wand.
2. Whisk must take out from the whisk body. Whisk can immerse in water for cleaning, but the whisk
body only allows cloth to wipe.
Don't permit water or liquid be flow into chopper lid、stick blender body、
wand、whisk body. If water get inside, drain and dry it before use it.
2
8
Chopper Lid, Whisk Holder
3
Wand Inner, Main Unit