Care And Cleaning - Midea CyclonBlade MBL17HS Guide D'utilisation

Operating instructions
Caution
• Never start on speeds at high with Hot Liquids to avoid possible burns. Use
caution; escaping steam or splashes may scald.
• Place the lid in jar completely. This will prevent expansion from affecting the
position of the lid when the machine is turned on.
• Start from low speed, slowly increase to high.
• Blades are sharp! Use extreme caution when handling the blade
assemblies. Always hold them by the base of the blade assembly.
• DO NOT PROCESS HOT FOODS OR HOT LIQUIDS. Do not process food
that is hotter than158°F. Allow very hot ingredients to cool before
processing. This product is not suitable for mixing dry food.
• Never attempt to remove the jar while the appliance is still running.
1. Due to the machine speed, processing times are much quicker than standard
appliances. Unless you are accustomed to the machine, count your time
carefully to avoid over-processing.
2. After turning the machine off, wait until the blades stop completely before
removing the lid or container from the motor base.
3. Note how to lock the personal blender into place with the micro switch in rear of
machine, with the lock or unlock arrows aligning.

Care and cleaning

Container
To prepare your new machine for initial use, the follow steps is under Normal
Cleaning.
Normal Cleaning:
1. Fill up container with half full warm water and add a couple of drops liquid dish
washing detergent to the container.
2. Push the lid completely.
3. Turn machine at "ON" position, start from low, and increase the speed to high
slowly.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, rinse and drain the container.
8