Cubii Total Body Plus Manuel D'instructions page 17

above) and then holding the Mode button for 3 seconds then release
the button to complete the profile reset. This action resets any data
displayed on the screen for the selected profile.
Distance Metric Toggle
To switch from miles to kilometers (or kilometers to miles), use the
MODE button to select the Distance metric. Then, hold the MODE
button for 6 seconds. If you are using the Cubii app, this update will
also be reflected there.
Manually Set a "Smart Reset"
If you do not pair your elliptical to the Cubii app, but still want your
console to reset each evening at midnight, follow the instructions below
to set the clock to the current time:
Simultaneously press the USER and MODE buttons 3 times in a row
•
to reset the clock. It should flash "00:00".
Press the USER button to cycle through hours until you get to the
•
right hour. Note that the clock uses military time.
Press the MODE button to cycle through minutes until you get to
•
the right minute.
Once you have entered the current time, simultaneously press the
•
USER and MODE buttons 3 times in a row to save the time.
If there is no activity for more than 5 seconds during this process, the
reset will be cancelled
The "smart reset" feature is ONLY activated if the user performs
the manual actions above to set the RTC on the console (or it will
automatically be applied if the user connects their app). If you do not
choose to manually set the clock following the instructions above, and
do not connect to the Cubii app, your console will continue to add and
display all data until you manually reset the screen.
Please note the "smart reset" function and clock setting will only remain
while the battery retains enough capacity to power the device. If the
battery is depleted, the "smart reset" feature must again be manually
established using the above instructions.
IV. Using Your Cubii Total Body+
13