Using The Chair Wheel Stopper - Cubii Total Body Plus Manuel D'instructions

Using the Chair Wheel Stopper

If you're using Cubii Total Body+ while sitting in a chair with wheels or
casters, follow the steps below:
• Find the wheel stopper that is included with your Total Body+.
• Lift up the back of your Cubii Total Body+ and place the interfacing
portion of the wheel stopper under the base plate. The nub goes
through the anchor hole.
• Roll one wheel from your chair onto the circle of the stopper until it
is snug in place.
• If you feel you are too close to your Cubii elliptical, the wheel
stopper can be detached from the base plate and positioned in the
location that is best for your needs.
Wheel Stopper
Anchor Hole
IV. Using Your Cubii Total Body+
9