Honeywell Home T6 Pro Serie Description Du Produit

T6 Pro Programmable Thermostat
Product Information
TH6320U2008, TH6220U2000, TH6210U2001,
Read before installing
Thermostat controls
System status
information
Cool On/Heat
On/Em Heat
On, Recovery,
Compressor
Protection
Schedule
information
Following time
based schedule
Actual time
Mode
Select system mode
Heat/Off/Cool/
Auto/EM Heat
(emergency heat)
Menu
Press to display
options. Start here
to set a program
schedule
You can search online for
User Guide or scan the QR code.
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-sets (shown in the table
below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you wake up and
the temperature you want during the
morning, until you leave for the day.
Away - Set to the time you leave home
and the temperature you want while
you are away (usually an energy-saving
level).
Home - Set to the time you return
home and the temperature you want
during the evening, until bedtime.
Sleep - Set to the time you go to
bed and the temperature you want
overnight (usually an energy-saving
level).
Indoor
temperature
setpoint
Press + or – to
change temperature
setting
Actual indoor
temperature
Temperature/
Navigation
buttons
Press to increase
or decrease
temperature
setpoint and to
navigate menus
and menu options
Fan
Select Fan mode
Auto/On/Circulate
Resideo 33-00182EFS for the
Heat Cool
70 ° 78 °
Wake
(6:00 am)
62 ° 85 °
Away
(8:00 am)
70 ° 78 °
Home
(6:00 pm)
62 ° 82 °
Sleep
(10:00 pm)
System operation settings
1 Press the Mode button to cycle to the next
available System mode.
2 Cycle through the modes until the
required System mode is displayed and
leave it to activate.
NOTE: Available System modes vary by model
and system settings.
System modes:
‒ Auto
‒ Heat
‒ Cool
‒ Em Heat
‒ Off
Fan operation settings
1 Press the Fan button to cycle to the next
available Fan mode.
2 Cycle through the modes until the
required Fan mode is displayed and leave
it to activate.
NOTE: Available Fan modes vary with system
settings.
Fan modes:
‒ Auto: Fan runs only when the heating or cooling
system is on.
‒ On: Fan is always on.
‒ Circ: Fan runs randomly about 33% of the time.
Set the time and date
1 Press Menu on your thermostat.
2 Press or to go to TIME. Press Select.
3 Press or to choose between 12 or 24
hour. Press Select.
4 Use or to adjust the hour. Press
Select.
5 Use or to adjust the minutes. Press
Select to exit Time menu.
6 Press the to go to DATE.
7 Press Select and use the
the flashing segment.
8 Press Select to advance to the next setting.
Press Home when done.
To adjust program schedules
1 Press Menu on your thermostat.
2 PROG is displayed. Press Select. Then ON
is displayed. (If you do not want to use a
to display OFF.
schedule, press or
Press Select.) Press Select.
3 Press or to select day or set of days
to edit. Press Select.
4 Press or to select a schedule period
to edit (Wake, Away, Home, and Sleep).
Press Select.
5 For each program period you can adjust
the time, temperature setting, or whether
that program period is being used (on or
off). Press or to change a setting. Or
press Select to leave the setting as is and
advance to the next setting.
6 Once you have set all the program time
and temperature settings for each day,
press Home to save the changes.
or to change