How To Install; Wireless Camera - Samsung SimpleVIEW SEW-3040W Manuel D'utilisation

Masquer les pouces Voir aussi pour SimpleVIEW SEW-3040W:
Table des Matières

Publicité

II
NSTALLATION
How to Install
CAUTION: If you use the system to watch a young child, do not place the camera in the
child Is reach.
Wireless Monitor
l.
Place the monitor in a place that will have clear
reception with your camera(s).
2.
Pull out the stand.
~ •
Do not pull up the stand lever with an excessive
force.
Wireless Camera
Before you install the camera, carefully plan where and how it will be positioned, and
where you will route the cable that connects the camera to the power adapter.
Before starting permanent installation, verify its performance by observing the image
on the monitor when camera is positioned in the same location/position where it will be
permanently installed and the monitor is placed in the location where it will be used
most of the time.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for the camera
that provides a clear view of the area you want to monitor, which is free from dust, and
is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
STRANGULATION HAZARD- Keep cord out of child Is reach. NEVER place camera or
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
l.
Carefully unpack the camera.
If you are installing cameras that did not come with the system, please see the
pairing camera section of this manual for details on installation.
2.
Mount the camera to the wall.
Mark the position of the screw holes on the wall,
and drill holes and insert 2 screws, then firmly
attach the camera to the wall by placing the
stand over the installed screws and pushing the
base downwards.
To install on a concrete wall, drill a hole and use
plastic anchor to fix.
3.
• Use the drilling template to drill holes on the wall
for camera installation. (Page 17)
• The camera can also be placed on a flat surface, such as a table or shelf, and no
mounting hardware is required.
Adjust the viewing angle of the camera.
You can install additional cameras (maximum of
4 cameras).
When adding cameras that were not included in
the original box, you will need to pair up the
cameras with the monitor.
English· 13

Publicité

Table des Matières
loading

Table des Matières