Chamberlain KLIK3U-BK2 Manuel D'instructions page 4

PROGRAM TO COMPATIBLE GARAGE
DOOR OPENERS
1. Remove the remote control cover. Press and
hold the program button until the LED turns
on.
2. Press and release the SMART/ LEARN button
on your garage door opener.
3. Select a button to program on the remote
control. Press and release the button the
specified number of times according to the
following chart. NOTE: Make sure the LED
stops flashing between each press of the
button. The garage door opener will respond
by clicking, blinking or activating.
LED
Program
Button
Cover
SMART/
LEARN
Button