Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONNECT TO THE MYQ
1.
Close the garage door.
IMPORTANT: The remote activates the garage
door during programming. Ensure the door is
clear of all obstructions.
2.
Look for a Wi-Fi or a Powered by myQ
to determine if your garage door opener is
®
myQ
programming.
3.
To start on monitoring the garage door
movements, scan the QR code to download
the myQ
4.
To add your remote and name, follow the in-
app instructions in order .
5.
After completing setup in the app, you can
control the garage door opener and to receive
notices ever time your garage door opens and
closes.
GETTING STARTED
Determine if the product you are programming the
remote control to has a SMART/LEARN button or
DIP Switches. The SMART/ LEARN button or DIP
Switches are located either on the product or in an
external receiver on or near the product. The
following instructions are for a garage door opener
with a SMART/LEARN Button. For DIP Switch
programming instructions or additional help, see
support.chamberlaingroup.com.
compatible. If not, proceed to
®
app .
SMART/
LEARN Button
®
APP
®
Or
OR
®
logo
Publicité
Table des Matières
