26
Liner Tabs
Carbon Filter
The Litter-Robot is equipped with a flexible Carbon Filter pad for absorbing odors in
the drawer. Easily removed and installed, replace the Carbon Filter as needed. Under
normal use, one filter should last a few months. The Carbon Filter is not required for the
unit to function.
Replacement Carbon Filters can be ordered from Litter-Robot.com.
Base Seal Strips
The Litter-Robot is equipped with brush-type Seal Strips that help contain odors within
the Waste Drawer and Base.
Replace the Seal Strips when you notice they are worn flat or peeling up. Make them
last longer by trimming loose edges between replacements. Be careful not to get them
wet when cleaning the Base or they may begin to peel.
Replacement Base Seal Strips can be ordered from Litter-Robot.com.
Carbon Filter
Base Seals
whiskersupport.com