Maintenance Schedule; General Recommendations; Lubrication Chart; Before Each Use - Poulan XT PXT155G42 Manuel De L'opérateur

MAINTENANCE
SCHEDULE
Check Brake Operation
Check Tire Pressure
T
Check Operator Presence & ROS Systems
R
Check for Loose Fasteners
A
C
Check/Replace Mower Blades
T

Lubrication Chart

0
Check Battery Level
R
Clean Battery and Terminals
Check Transaxle Cooling
Check Mower Levelness
Che ck V-Belts
Check Engine Oil Level
Change Engine Oil (models with oil filter)
Change Engine Oil ( models
E
Clean Air Filter
N
Clean Air Screen
G
Inspect Muffler/Spark Arrester
I
N
Replace Oil Filter (If equipped)
E
Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient tempe
2 - Service more often when operating in dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must main tain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
At least once a season, check to see if you should make
any of the adjustments described in the Service and
Adjustments section of this manual.
• At least once a year you should replace the spark plug,
clean or replace air filter, and check blades and belts
for wear. A new spark plug and a clean air filter ensure
proper air-fuel mixture and help your engine run better
and last longer.

BEFORE EACH USE

• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and ROS systems for proper
operation.
• Check for loose fasteners.
MAINTENANCE
BEFORE
EACH
USE
without oil filter)
atures. r
EVERY EVERY EVERY
8 25
HOURS HOURS HOURS
3
4
1,2
2
2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
LUBRICATION CHART
SPINDLE ZERK
FRONT WHEEL
BEARING ZERK
SAE 30 OR 10W30 MOTOR OIL
GENERAL PURPOSE GREASE
REFER TO MAINTENANCE "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS.
LU BRI CANTS WILL ATTRACT DUST AND DIRT THAT WILL
SHORT EN THE LIFE OF THE SELF-LU BRI CAT ING BEARINGS.
IF YOU FEEL THEY MUST BE LU BRI CAT ED, USE ONLY A
DRY, POW DERED GRAPHITE TYPE LU BRI CANT SPARINGLY.
14
EVERY EVERY
50 100 SEASON
HOURS
1,2
1
, 2
2
2
SPINDLE ZERK
FRONT WHEEL
BEARING ZERK
BEFORE
STORAGE
ENGINE
GEARSHIFT
PIVOTS
VISCOUS