Removing The Activepure Cell; Replacing The Activepure Cell - Aerus BEYOND PHX Manuel De L'utilisateur

REMOVING THE ACTIVEPURE CELL

1. Remove the cover of the PHX by removing the 2 side screws.
2. Remove four (4) screws holding ActivePure Cell in place.
3. Remove ActivePure Cell by pulling it out from under the tab indicated. Tilt outward and pull.
Disconnect power supply from the cell plug.

REPLACING THE ACTIVEPURE CELL

NOTE: For optimal performance, we recommend the replacement of the ActivePure® Cell
every year, even if the UV lamp appears to be operating normally.
1. Replace the ActivePure Cell by reversing steps 2 and 3 above.
2. Return cover to unit and put the side screws (or optional torx security screws) back into place.
6
CAUTION: Disconnect power at the breaker or fuse panel before
installing unit. Power switch should be in the Off position.
CAUTION: Disconnect power at the breaker or fuse panel before
installing unit. Power switch should be in the Off position.