Olsson and Brothers MARATHON Guide De L'utilisateur Et Garantie page 19

PRESTACIONES EQUIPOS
Modelos Marathon, Zebra y Rhino
WHEEL SIZE IN INCHES
MAXIMUM MOTOR POWER
STRUCTURE MATERIAL
BATTERY'S CHARGE TIME
FRONT / REAR LIGHT
MAX WEIGHT SUPPORTED
E-SCOOTER'S ASSEMBLY
1. Place the scooter on a flat surface.
2.
Open the folding lever of the e-scooter by placing it vertically.
3.
Insert the upper bar in the head, fitting it, this operation must be done with the
tube in vertical.
4.
Connect the cables as shown in the figure. Then tighten the screws with a
hexagonal wrench to fix the head to the bar, making sure that they are perfectly
adjusted, this step is very important for the management of the steering.
5.
After assembly, check the Display works correctly (cable connection before done).
WHEEL TYPE
PLICATE
BATTERY
AUTONOMY
DISPLAY
BLUETOTH
APP
ELECTRIC BRAKE
DISC BRAKE
WEIGHT
SPEED
MAX. ACCLIVITY
8,5"
WITH INFLATABLE CHAMBER
500W
REINFORCED ALUMINUM
REINFORCED SECURITY SYSTEM
Marathon model: 14.000 mAh Samsung
Cebra & Rhino model: 7.800mAh
99% Black : 6.600mAh
Marathon: until 50KM
Cebra & Rhino: 30KM
99%Black: 24KM
varies according to usability conditions
Marathon: until 7h
Cebra, Rhino & 99%Black: until 4h
YES
YES
YES
YES
e-ABS. REGENERATIVE
YES
13 – 15 KG
up to 25km (depending on conditions of use)
120KG
15º