Assembly instructions / Instructions d'assemblage
9.
Install overhead cabinets / Installation des armoires murales supérieures
❚ Install the overheads cabinets following the procedure performed previously in step 8.
Installez les armoires murales supérieures en suivant la procédure effectuée précédemment à l'étape 8.
After the punchouts are removed from the wall mounts and/ or
overhead cabinets install the rubber grommet.
Une fois les deux œillets en caoutchouc sur les perforations retirés
et les deux armoires installées, remettre en place les œillets
❚ Bolt the cabinets together and then to the wall. / Vissez les armoires ensemble, et ensuite au mur.
Stud/montant
Washer/rondelle
Lag screw / Vis tirefond
After both knock off removed and both
cabinets installed they must put this rubber
grommet
After both knock off removed and both
cabinets installed they must put this rubber
grommet
Knock off for cable entry
Has to remove with hammer
Knock off for cable entry, have to be remove with an
hammer. / Trou pour l'entrée de câbles, le couvercle de
caoutchouc doit être enlevé avec un marteau.
10
Knock off for cable entry
Has to remove with hammer