Table des Matières
Publicité
11
Notice: please preload
all the screws into the
holes first and then
fasten them up.
/Remarque : veuillez
d'abord pré-charger
toutes les vis dans les
trous, puis les fixer.
11.1 Use the (J) M6 screws to fix the (G3) hook on the desk top as shown in
EN
the figure, using the provided (M1) spanner.
11.2 Connect the (I3) power cord, the motor, the (I2) power supply and (I1) the
handset as shown.
11.1 Utilisez les (J) vis M6 pour fixer le crochet (G3) sur le bureau comme
FR
indiqué sur la figure, en utilisant la clé fournie (M 1).
11.2 Connectez le cordon d'alimentation (I3), le moteur, l'alimentation électrique
(I2) et le combiné (I1) comme indiqué.
14
Operational instructions/Instructions d'Utilisation
EN
A. Reset operation
Press and hold the "
" button until 5 seconds after the upgrade column stops, the
reset starts, don't release the "
" button at this time, the lifting column slowly
descends to the lowest end, and when all the lifting column reach the lowest end and
rebound 1 cm/0.4", Release the "
" key, the reset operation is completed.
If there is an emergency during the reset process, you can release the "
at any time, the lifting column will stop running, and the reset will be terminated. After
the reset is terminated, the reset operation needs to be performed again until the
reset is operations cannot be performed.
B. Height Adjustment
Directly press and hold the "
" key or "
C. Fault
When a fault occurs, press the button and the buzzer will beep once, but there is no
action. The user needs to unplug the power to restart, and perform the reset
operation. If the failt still cannot be resolved, please ask qualified technician for help.
" button
" key to control the desktop to rise of fall.
15
Publicité
Table des Matières
