Operating Elements - Olympia NC 450 Mode D'emploi

Operating Elements

1 2 3
9 10
1 1 or move upwards in the menu settings
2 4 or SET to open the menu settings or move one
level further
3 2 or MG to activate/deactivate the magnetic test
4 5 or BATCH to process batches
5 3 or UV to activate/deactivate the ultraviolet test
6 6 or ADD to activate/deactivate the add function
7 0
8 AUTO/MANUAL to switch between automatic and
manual start
9 7 or move downwards in open the menu settings
10 8 or COUNT to activate Counting without sensors
11 9
12 RESTART
Display
13 14
19 20 21 22
12
4 5 6 7
11
15 16 17
23
The diagram illustrates the display during the power on
self-test. Some of the features illustrated do not belong
8
to the functional range of this bank note counter.
13 Magnet sensor is activated
14 Ultraviolet sensor is activated
15 Top display
16 Quantity
17 Batch function is activated
18 Add function is activated
19 Count without sensors is activated
20 Settings
21 Manual start is activated
22 Automatic start is activated
23 Bottom display
Operation
12
Switching the Bank Note Counter On/Off
The bank note counter is switched on and off using the
switch on the rear of the machine.
If the machine will not be used for a longer period,
disconnect it from the power outlet.
18
24 On
25 Off
26 Mains power connection
27 Connection socket for external display
After switching the machine on, it performs a self-diag­
nosis. During the self-diagnosis,
pears in the display. When the self-diagnosis has fin­
ished without any errors,
16
G
24 25
26 27
8888 or 888888
X 0
appears in the display.
ap­