Liemke Merlin-50 Mode D'emploi page 28

Malfunction
Error in attachment mode
The point of impact
cannot be adjusted
and the values are
not saved.
The image goes out
after the shot.
Point of impact is not
constant.
Possible reason
Instead of the image
shift function, pixel
correction or the zoom
coordinates menu was
activated in the main
menu.
Battery compartment
cover is not seated
correctly.
Minimum mounting
distance not ob-
served.
Insufficient adapter
clamping voltage.
Memory location of
the image shift co-
ordinates incorrectly
selected.
The parallax compen-
sation on the target
optics is not set to
infinity.
Minimum mounting
distance not ob-
served.
Correction
Set the point of
impact.
Check cover for prop-
er seating (seal must
not be visible from the
outside).
Check and correct
distance.
Increase clamping
voltage.
Check that the clamp-
ing adapter and
assembly are fixed in
position.
Select memory
location.
If possible, set the par-
allax compensation to
infinity.
If parallax compensa-
tion is not available,
look at the centre of
the lens as much as
possible.
Check and correct
distance.