Soozier A90-198 Manuel D'utilisation page 11

COMPUTER OPERATING INSTRUCTIONS
SCAN
TIME
SPEED
DISTANCE
TOTAL DIST
PULSE
CALORIES
1. You will need 2AA ba�eries (Not provided) to operate the Computer.
2. To select the func�on you want, press the MODE bu�on and then select the
func�on of choice from the table above.
3. To reset the Computer, hold down the MODE bu�on for 4 seconds.
4. The Computer will automa�cally turn off a�er 4 minutes when the bike is not in
use. Press any key to restart.
5. To monitor your heart rate, place your thumbs on the heart rate sensor for a few
seconds and check the display.
6. To adjust the resistance, turn the tension control to the right (harder), or to the
le� (easier) .
7. If there is an improper display on the Computer, please replace both ba�eries
with new ones at the same �me.
8. To move the bike, hold onto the saddle support pole, li� and push forward.
Scans all functions – TIME, SPEED, DISTANCE, TOTAL DIST, PULSE, CALORIES
Displays work out time lapse while exercising
Displays the current speed
Displays the distance while exercising
Displays the total distance at the end of your workout
Displays your heart rate
Displays the calories you have burned
11