Maintenance And Cleaning; Door Installation - EXPO Quadro Vino QV12 Manuel D'instructions

This appliance can be used by children over the age of 8 and by persons with reduced physical, sensory or mental capabilities or
lacking experience exclusively under supervision regarding the safe use of the appliance and in understanding of related risks.
Children must not play with the appliance.
Cleaning and user maintenance shall not be carried out by children without supervision.
Opening the door for extended periods can cause a significant increase of the temperature in the appliance compartments.
Maximum support load: 3 kg.
Sound pressure emission is under 70dB(A).
The packaged product must be handled in the horizontal position by forklift or other, and in the upright position exclusively by
hand by at least two operators.
In case the product needs to be moved to a service center, remove the door and move the structure horizontally. During
transport keep the product in the horizontal position to avoid danger of falling.
The product becomes stable only if secured to a wall. Do not install any other way and do not position on any other surface.

5. MAINTENANCE AND CLEANING

Warning: unplug the appliance before performing any maintenance.
Mechanical parts of QUADRO VINO do not require any periodic maintenance. However, to maximize the wine cellar's life, it is
necessary to do regular maintenance. Once a year, completely empty the cabinet, and clean using water and mild detergent. Do
not use corrosive products, soaps or abrasive materials. Clean the wooden frame with a dry cloth or with speci c products for
wood.
Remove any dust from the grid on the side which could limit correct ventilation.

6. DOOR INSTALLATION

1. Insert the steel pivot in
the lower bracket's slot
When transporting or shipping the product is recommended to remove the door.
Otherwise there is a risk that the metal pin can damage the frame.
2. Insert the plastic guards
in the frame holes
3. Place the frame, equipped
with plastic guards, on the
pivot
ENGLISH
4. Fix the screw in the upper
bracket making sure it ts in
the frame's plastic guard