Short Manual - Solarc e.GO! MASTER Manuel D'utilisation Et Informations Techniques

GO!
e. is offered into 3 verions:
Fun (1 solar module, battery case for 2 or 4 batteries AA NiMH/NiCd/RAM)
Master (2 solar modules, battery case for 2 or 4 batteries AA NiMH/NiCd/RAM)
Professional (2 solar modules with approx. 10% of a higher solar module performance, battery case for 1 to 2 Li-Ion batteries or alternatively 2 or
4 batteries AA NiMH/NiCd/RAM)
e.GO! FUN (on the left) and e.GO! MASTER (on the
supply like)
e.GO! PROFESSIONAL with mains adapter 1.7 A, mobile phone adapter cable + 3 adapter plugs, PDA adapter cable + 2 adapter plugs, rubber housing
protection, Li-Ion battery (scope of supply like); on the right without rubber housing protection

Short manual

1. Inserting
batteries
First put batteries
AA batteries
against contacts,
(max. 4 piece)
then push down
Note: use only batteries in accable ance with Tab.1 (see below), note the correct polarity, don't use faulty or consumed batteries, insert only batteries
with the same charge condition, don't charge primary batteries!
right), respectively with mains adapter 1 A, mobile phone adapter cable + 3 adapter plugs (scope of
e.GO! FUN/MASTER
10
Li-Ionen batteries
(max. 2 piece)
e.GO! PROFESSIONAL