Publicité
17760 Rowland St,
Rowland Heights, CA 91748
T 626.968.5666. F 626.369.2695.
www.currentlighting.com/aal
UCM2-LK UPGRADE KIT INSTALLATION INSTRUCTIONS
UNIVERSE 2.0 MEDIUM
Remove (2) screws from driver tray as shown.
Connect wires from new driver assembly, Make
sure to follow wire polarity i.e. green to green,
white to white etc. Tuck leads into driver
housing (make sure not to pinch wires).
Attached (2) safety cables from new Deck
Assembly. As shown.
Using new ¼-20 Screws and O-rings, attach
new deck assembly to housing. Torque screws to
48 in lbs.
4
Pull existing driver tray from fixture.
Clips for
Safety
Cables
7
Rotate driver assembly to make sure it lines up
as shown in the diagram.
10
Make wire harness connection from driver
assembly to Deck assembly as shown.
13
Installation is complete.
5
Disconnect all wires coming from arm as shown.
Remove and discard existing driver assembly.
Driver
Notch
on Ring
8
Install new driver assembly back and secure in
place using provided screws (hand tighten).
11
Align Deck assembly as shown, make sure street
side label is pointing towards the correct direction.
Architectural Area Lighting
17760 Rowland St, Rowland Heights, CA 91748 T
626.968.5666 | F 626.369.2695 |
14
currentlighting.com/aal
6
9
Street Side
93088525 Fixture Assembly 36LED UCM Page 7_A_IMAGE_PASTED_FROM_CLIPBOARD_INTO_SOLID_EDGE_2_1.bmp
12
Page 2 of 3
(Rev 22/08/22
Publicité
