Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Fig. 8
Trigger gun
Foam cannon
4. Turn on the water supply, and squeeze the
trigger. The detergent in the bottle will be
sprayed on the car.
General Car Washing Process
1. Using the adjustable nozzle on the sprayer,
rinse the car to remove loose debris and grime.
2. Connect the foam cannon and foam the car
from top to bottom.
3. Using a wash mitt for car soaked with
detergent water, wipe the whole car. After each
panel, rinse the wash mitt in clean water before
working on another panel.
4. After the whole car is wiped, reattach the spray
nozzle and rinse the car from top to bottom.
Cleaning + Maintenance
1. Remove the detergent bottle from the foam
cannon and rinse the bottle with water to
remove any detergent residue.
2. Fill the detergent bottle with water, then
reinstall. Spray the full bottle of water through
the foam cannon to clean any detergent
residue from inside the foam cannon.
3. Remove the foam cannon from the trigger gun.
Rinse the outside of the foam cannon and
sprayer completely to remove any detergent
residue. Allow all parts to dry completely before
storage.
Service + Support
If your Aqua Joe
®
Foam Cannon requires service or maintenance,
please call Snow Joe
service at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you will need
to provide the model and serial numbers, which
can be found on the registration card. Copy these
numbers into the space provided below.
Record the following numbers from the registration card
of your new product:
A J
-
S P X N
4
AJ-SPXN Car Wash Sprayer +
+ Sun Joe
customer
®
®
Model #:
Serial #:
Publicité
Table des Matières
