Operating Instructions; Deploy The Stand; Hang With The Rope Strap; Initial Setup - Hydrofarm Autopilot APCEM2 Instructions

Masquer les pouces Voir aussi pour Autopilot APCEM2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DEPLOY THE STAND

HANG WITH THE ROPE STRAP

INITIAL SETUP

When first unboxing, plug in the unit to the included Micro USB (or one of your own) to almost
any cell phone charger or USB power source. If successfully connected, 3 things will happen while
booting up:
• 3 LEDs flash one by one
• Chart display shows the current software version & "Warm Up"
• Main display shows a countdown from 10
Once the countdown is complete, your product is ready to use. No initial setup or calibration is
needed.
CO
, TEMPERATURE, RH READINGS
2
The device has three built-in main measureable parameters: ambient carbon dioxide (11),
temperature (9), and RH (10). They are constantly displayed on screen. When any button is pressed
the APCEM2 green screen will illuminate for 30 seconds.

OPERATING INSTRUCTIONS

REAR VIEW
7

Publicité

Table des Matières
loading

Table des Matières