Optional Accessories - EQUATION EQI-70C Instructions Pour L'installation, L'utilisation Et L'entretien

3. DISMANTLING THE VENTILATOR
ATTENTION! Make sure that the appliance is unplugged before handling any electrical parts.
To change the ventilators proceed as follows:
3. Replace the ventilator and put it back in position by following the above instructions but
in the reverse order.
4. ELECTRICAL OUTLINE
Term. 50ºC
L
N
T
Fig.1
Fig.3
220V.
M.V.
50Hz.
22W.
220V.
50Hz.
M.V.
22W.
2. Release the front grille by loosening the two
screws at the bottom (Fig.1 and Fig.2)
2. Release the fan by loosening the two screws
that hold it in place at the bottom (Fig.3).
Disconnect the fan's faston terminals.

5. OPTIONAL ACCESSORIES

EQUATION offers the following accessories for
this Insert:
a) Steel pipes coated in vitrified enamel, elbows,
caps for the chimney construction, protection
shields for the sides.
Fig.2