Bergstrom LITE Actros MP5 Instructions De Montage page 16

LITE
EN
8
Position the console and align the unit. Once
aligned, remove the console and tighten the
M8/125x45 screws until it comes up against the
hexagons in order to secure the unit.
8
Caution: Once aligned, it is very important to check on the inside that the condenser's air input
!
grilles are not inside the seal, thus ensuring water cannot enter the cabin through them.
9
Position EPDM seal plugs as indicated: between
the roof and the upholstery on the side and front
parts of the hatches.
9
SIDE PART
8
8
16
FRONT PART
®
8
9