Functions - Olympia NC 520 Plus Mode D'emploi

Inserting Bank Notes
A
C
Slide and fan the bank notes in the bundle so that the
top bank note is somewhat lower than the one following.
Insert the bank notes in the infeed tray (A).
Or
Insert the bundle vertically in the infeed tray and guide
the bundle to the rear so that the bank notes shift against
each other (B).
The counting process starts up automatically if the
automatic start function has been activated (AUTO ap­
pears in the display).
Bank notes which have been inserted incorrectly,
as illustrated in C and D, lead to an improper
count or a malfunction.
Since the security features of bank notes are pro­
vided on both sides, the process for detecting
counterfeit bank notes is performed reliably on both
sides.
B
D

Functions

Counting
This function counts the number of bank notes and,
depending on the sensor setting, their validity.
During the counting process, the quantity of bank notes
appears in the top display.
When the bank notes counted are removed from the
output tray, the quantity count in the top display is reset
to X 0 and the bottom display displays the quantity.
Adding
If several bundles of bank notes are stacked in the in­
feed tray one after the other, counting continues even if
the bank notes already counted are removed from the
output tray.
Press the ADD button
The Add function is activated/deactivated.
Batch
This function causes counting to stop when the preset
quantity of bank notes has been counted. If the counted
batch of bank notes is removed from the output tray, the
display is reset to X 0
The quantity of bank notes can be set to any number
between 1 and 999
bottom display.
If the infeed tray becomes empty before reaching the
preset quantity, BATCH flashes in the display. When
more bank notes are then inserted in the infeed tray, the
process is resumed.
Press the BATCH button.
BATCH flashes in the display. The preset quantity
100 appears in the bottom display.
Use the digit buttons to enter the quantity you want
counted.
The quantity entered appears in the bottom display.
G
and the next batch is counted.
. The preset quantity appears in the
15