Olympia NC 520 Plus Mode D'emploi page 14

24 On
25 Off
26 Mains power connection
27 Connection socket for external display
After switching the machine on, it performs a self-diag­
nosis. During the self-diagnosis,
pears in the display. When the self-diagnosis has fin­
ished without any errors,
If an error is detected, it is indicated in the top display
(refer to the Error table) and the background turns red.
14
24 25
26 27
8888 or 888888
X 0
appears in the display.
Validation Tests
The best results are achieved after a warm-up
phase of 3 minutes.
Bright ambient light can affect the sensor and falsify
results.
Before inserting the bank notes, select which features
(magnetic and/or ultraviolet) you want to test.
Press the MG button.
The magnet sensor used to detect the magnetic ink is
activated/deactivated. When activated, the sensor is
indicated in the display. When activated, the sensor is
indicated in the display.
Press the UV button.
The ultraviolet sensor for detecting UV light is acti­
vated/deactivated. When activated, the sensor is indi­
cated in the display.
Preparing Bank Notes
Pay attention to the following points to prevent malfunc­
tions.
A
ap­
C
Check the batch of bank notes for paper clippings,
paper clips, rubber bands and other foreign bodies (A) and
remove them before inserting the bundle in the machine.
Do not insert any damaged bank notes (B).
Smooth any creased and folded bank notes before in­
serting them (C/D).
Do not attempt to count notes which are too thick or
hard items.
Fan out the bank notes to separate them prior to inser­
tion.
G
B
D