Gladiator GABC05FDKG Guide D'utilisation Et D'entretien page 11

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
If you experience
The motor seems to run too
much (contd.)
Temperature is too warm
There is interior moisture buildup
The door is difficult to open
The door will not close
completely
Possible Causes
Is the control set correctly for the
surrounding conditions?
Is the door closed completely?
Are the condenser coils dirty?
Is the door opened often?
Is the control set correctly for the
surrounding conditions?
Is the base grille blocked?
Is the door opened often?
Is it humid?
Is the control set correctly for the
surrounding conditions?
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Is the gasket dirty or sticky?
Are the racks or shelves out of
position?
Is the gasket sticking?
Solution
See "Operating Your Beverage Cooler."
Push the door firmly shut. If it will not shut all the way, see
"The door will not close completely" later in this section.
This obstructs air transfer and makes the motor work
harder. Clean the condenser coils.
See "Cleaning."
Be aware that the beverage cooler will warm when this
occurs. In order to keep the beverage cooler cool, try to
get everything you need out of the beverage cooler at
once, keep wine bottles positioned label side up so that
they are easy to find, and close the door as soon as the
items are removed.
See "Operating Your Beverage Cooler."
For best performance, do not install the beverage cooler
behind a cabinet door or block the base grille.
To avoid humidity buildup, try to get everything you need
out of the beverage cooler at once, keep wine bottles
positioned label side up so that they are easy to find, and
close the door as soon as the items are removed. When
the door is opened, humidity from the room air enters the
beverage cooler. The more often the door is opened, the
faster humidity builds up, especially when the room itself is
very humid.
It is normal for moisture to build up inside the beverage
cooler when the air is humid.
See "Operating Your Beverage Cooler."
Clean the gasket and the surface that it touches. Rub a thin
coat of paraffin wax on the gasket following cleaning.
Put the racks or shelves back into their correct positions.
See "Shelves" for more information.
Clean the gasket and the surface that it touches. Rub a thin
coat of paraffin wax on the gasket following cleaning.
11