Fromm & Starck STAR_ATFE_21 Manuel D'utilisation page 34

INSTALLING THE DESK TOP
Assemble the desk top (1, 2, 3) with the wooden pegs (M), place the brackets

(4 & 17) in the locations shown in the figure below and secure with the
respective bolts.
Bolt down each of the brackets using a screwdriver (not included).

Place the frame to the assembled desk top and align the holes on both

components according to the hole pattern. Use the aligned holes to attach
both components to one another with the bolts (G).
Install the control panel (15) as shown in the figure below using the bolts (F).
