Kenwood STP01 Mode D'emploi page 8

Table des Matières

Publicité

Do not leave the packaging near children
because it is potentially dangerous.
• Always turn off the appliance and unplug the
power cord from the mains socket before
filling the tank with water.
• If the power cord is damaged, it shall
be replaced by the Manufacturer, by its
Technical Assistance Service or by a similarly
qualified person in order to avoid any hazard.
• Never put live parts in contact with water: a
short circuit may occur!
• Never touch the appliance, the plug and the
power cord if your hands are wet or if you
are barefoot.
• Do not place the power cord against sharp
edges or sharp parts.
• Before plugging the appliance into the mains
socket, ensure the voltage shown on the
rating plate matches the local voltage supply.
• Always connect the appliance to an earthed
socket.
• Fill up the tank with water before starting
up the appliance. Make sure the appliance
is unplugged from the power supply before
filling the tank with water.
• Never place the iron directly underneath the
tap.
• During use, place the appliance on a
horizontal and well lit up surface.
• Never leave the appliance unattended when
it is plugged in.
• The appliance shall be used and rested on a
horizontal and steady surface.
• When placing the iron on its rest, make sure
the supporting surface is stable.
English
8

Publicité

Table des Matières
loading

Table des Matières