Pre-Ride Inspection & Checklist; Handlebar - Mondraker KIDS Série Manuel D'utilisation

3. POWERING OFF THE BIKE
Push and hold the left button for 3 seconds. The display will show "E9" , then you can release the button.
07. PRE-RIDE INSPECTION & CHECKLIST
1. BRAKE: When you squeeze the brake lever, the brake calliper should provide positive braking action.
When the brake lever is released, the rear wheel should spin freely.

2. HANDLEBAR:

The front wheel and handlebar should move together as "one piece" . The stem bolts should
be tightened to spec. The headset bearings should turn smoothly with no play between the frame and
handlebar.
3. CHAIN: The chain should not rub against the covers and must be properly lubricated.
4. COVERS: The footrest, motor and chain covers must be tight. They must not be cracked or damaged.
5. SEAT HEIGHT: The correct seat height is when the child is able to touch ground with both feet.
6. BATTERY:
Make sure the battery is inserted all the way to the bottom of the socket. Check that the battery
is fully charged.
7. SPEED MODE SELECTED:
8. TYRE PRESSURE:
9. WHEELS:
Make sure that the four wheel nuts are tightened to spec.
8
7
9
Check that the selected speed mode is appropriate.
Check that both tyres are sufficiently inflated.
5
3
4
7
2
6
1
8
9
39