Handlebar Assembly; Seat Height - Mondraker KIDS Série Manuel D'utilisation

3. HANDLEBAR ASSEMBLY

The handlebar is factory assembled. However, if
adjustment is needed, please keep the handle-
bar aligned in the centre of the stem as pictured.

4. SEAT HEIGHT:

WARNING: DO NOT SLIDE THE SEATPOST OUT ABOVE ITS "MINIMUM INSERTION"
POINT, AS MARKED ON THE SEATPOST.
34
For a correct seat height, the child should be able to touch the ground with both feet.
4mm
5mm
In order to rotate the handlebar, It must be per-
pendicular to the front wheel. Adjustments and
tightening can be performed using both stem
bolts.
90º