Fisher-Price Power Wheels Directives page 7

1
Black
Cover
Bottom
• Loosen the screws in the black
cover lid on your old battery con-
nector using a Phillips screwdriver.
• Remove the screws, cover bot-
tom and lid, and flexible tube from
the old battery's connector.
• Dispose of the used battery
properly. See page 15 for
important information.
2
H-Style Wire
Harness
Converter
Super 6 and 12 Volt Vehicles
Flexible
Tube
Black
Cover
Lid
Your Old
Battery's
Connector
Black Cover
Bottom
H-Style
Connector (White)
Note to 12 Volt Vehicle Owners:
Your vehicle requires two batteries
and H-Style Wire Harness Converter
for operation. Stack the two H-style
connectors on the H-Style Wire
Harness Converter (one included
with each new battery) and press to
join. (See inset.)
• With the Power Wheels
facing up, fit the H-style con-
nector(s) on the converter(s) into
the black cover bottom. Firmly
press the H-style connectors into
the black cover bottom.
3
H-Style
Wire Harness
Converter
Black
Cover
Bottom
• Open the flexible tube along
its side seam and fit the wire
harness converter wires inside
the tube.
• Do not slide the tube all the way
down to the black cover bottom.
7
® logo(s)
Flexible
Tube