Plebani Fly'n Board Instructions D'assemblage Et D'emploi page 18

WAY OF USE:
When the second child is not on board but are using the pram/stroller, you can raise board
hanging it to the handles of the stroller (Fig. 19) using strap. Fasten the strap hook into the
hole on the back of the board (Fig. 20) and then attach strap to the handles. Remove strap
when not in use; it could be a source of danger.
BOARD REMOVING
When you want to remove board from stroller, pull unlock slider on connectors and remove
the board (Fig. 21). Always store it in a protected and safe place; board should not be a
source of danger to your children.
IMPORTANT: When you definitely stop using stroller/pram or board, REMEMBER TO
REMOVE THE CONNECTORS from the frame and fix them to board TO AVOID LOSING.
WARNINGS
:
READ CAREFULLY THESE INSTRUCTIONS BEFORE ASSEMBLY OF BUGGY-BOARD.
KEEP THIS MANUAL FOR FUTURE REFERENCES. THE NON-OBSERVANCE OF
THESE WARNINGS AND USE INSTRUCTIONS COULD CAUSE SERIOUS
CONSEQUENCES TO YOUR BABY'S SAFETY.
- WARNING: NEVER LEAVE YOUR CHILD UNATTENDED, WITHOUT THE
SUPERVISION OF AN ADULT. THE SAFETY OF YOUR CHILD IS UNDER YOUR
RESPONSIBILITY.
- Throw away and keep out of baby's reach the poly bags of the packing, they might be
risks of suffocation.
- Before every use check all locking systems work correctly and all components are not
defected or damaged, in this case do not use the item any longer.
- Check that board doesn't have any loosened or improperly assembled screws, or any
other elements which can injure your baby. Do not use with any broken, defected or
loosen parts.
- Make assembly and installation operations WITHOUT any babies around. Assembly of
this product should be made by an adult.
- Do not make any modifications or add other elements that may compromise the safety of
the item; it could be dangerous. Do not use with any broken, defective or missing parts.
18
: