Sorelle 151 Instructions D'assemblage Et D'utilisation page 4

151- TODDLER RAIL INSTRUCTION
151 Instructions pour la barrière pour enfant
Please make sure that you are going
to transfer below product (Fig.1) to
a toddler bed.
Item no., 1105
Product name:
Princeton Elite Crib and Changer
You can find the item no. and product name from the
packaging carton or the sticker which is affixed to the
Headboard.
TODDLER BED ASSEMBLY
1. Before Mini Rail assembly, please Remove front side rail and related parts as per below ( Fig 2),
Then assembly toddler rail(A&
MATTRESS SUPPORT MUST BE IN THE
2.Store crib front side rail and balance hardware together in a safe place.
Fig. 2
FINALLY CHECK
Important: In order to properly assemble the toddler bed, carry out the operations in order specified. Failure to assemble the toddler bed in the recommended
order can make the toddler bed hazardous.
A1 by 3 bolts(B) and 4 bolts(C) & 4 barrel nuts (D) as per below (Fig 3), )
LOWEST POSITION
A
B
e
ENSURE
3x
C
B
B
A
C
4x
A1
DO NOT
Fig. 1
Fig. 3
A
C
4x
D
(B) (x3)
(D) (x4)
(C) (x4)
PAGE 4