Sommaire des Matières pour Sorelle Princeton Elite
Page 1
3453, DU PRESIDENT KENNEDY LAC MEGANTIC, QUEBEC, CANADA G6B 2Y4 Website: www.sorellefurniture.com / Site Internet : www.sorellefurniture.com Princeton Elite Crib and Changer Lit de bébé & table à langer Princeton Elite Assembly Instruction / Instructions d’Assemblage Important Information: Read all instructions BEFORE assembling crib / Lire attentivement toutes les instructions avant de procéder à l’assemblage du lit.
Page 2
Securely tighten loose bolts and other fasteners. Do not use crib if any parts are missing, damaged or broken.Contact C&T International Inc./Sorelle for replacement parts and instructional literature if needed. Do not substitute parts. *Follow warnings on all products in a crib.
Page 3
Do not leave a child unattended in or on this accessory. Child must be no more than 30 lbs. to use this changing table. Use only the pad provided by C&T International / Sorelle or Manufacturer’s Toddler Bed Warnings WARNING INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Page 4
SORELLE NOTES ON ASSEMBLY: -During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
N’UTILISEZ PAS le lit si des pièces sont endommagées ou manquantes. Demandez à Sorelle pour obtenir des pièces de remplacement ou le mode d’emploi, si nécessaire. Ne substituez pas de pièces de remplacement.
Page 6
SORELLE MISES EN GARDE POUR LE LIT D’ENFANT MISE EN GARDE DES ENFANTS SONT DÉCÉDÉS DANS DES LITS D’ENFANTS PAR SUITE DE COINCEMENT. Des ouvertures dans le lit ou entre les différentes pièces du lit peuvent coincer la tête ou le cou d’un jeune enfant.
Page 7
PRÉCISIONS SUR L’ENTRETIEN Ne pas rayer le fini. Inspectez le produit périodiquement. Contactez C&T International/Sorelle pour des pièces de rechange ou des questions. N’entreposez pas le produit ou une de ces pièces dans des conditions de température non contrôlées tel qu’un grenier chaud ou un sous-sol froid parce que ces conditions peuvent causer une perte d’intégrité...
Page 8
SORELLE Crib Assembly Parts /PIÈCES D'ASSEMBLAGE DE LA COUCHETTE (A) Left Side Frame (x1) (A1) Left -Front Post (x1) (A2) Left -Back Post (x1) (B) Back Side Frame (x1) (A2) Poteau arrière gauche (x1) (B) Cadre arrière (x1) (A) Cadre du côté gauche (x1)
Page 9
SORELLE Crib Assembly Parts /PIÈCES D'ASSEMBLAGE DE LA COUCHETTE PARTS LIST FOR CHANGER/DRESSER ASSEMBLY LISTE DES PIÈCES POUR L’ASSEMBLAGE DE LA TABLE À LANGER (O6) Front - Middle Bar (x1) (O7) Front - Bottom Bar (x1) (O5) Front - Middle Bar...
SORELLE Assembly / ASSEMBLAGE Step 1 DRAWER ASSEMBLY / Étape 1 L’ASSEMBLAGE DES TIROIRS Parts Needed: refer to, “Parts List For DRAWER ASSEMBLY”. Phillips screw driver needed for fightening (HG) screws Pour connaitre les pièces dont vous aurez besoin, référez-vous à la« Liste des pièces pour l’assemblage des tiroirs. »...
Page 11
SORELLE Assembly / ASSEMBLAGE Step 2 CHANGER/DRESSER ASSEMBLY / Étape 2 ASSEMBLAGE DE LA TABLE À LANGER Parts Needed: refer to “PARTS LIST FOR CHANGER/DRESSER ASSEMBLY” Pour connaitre les pièces dont vous aurez besoin, référez-vous à la « Liste des pièces pour l’assemblage de la table à...
Page 12
SORELLE Assembly / ASSEMBLAGE Step 2 CHANGER/DRESSER ASSEMBLY / Étape 2 ASSEMBLAGE DE LA TABLE À LANGER Parts Needed: refer to “PARTS LIST FOR CHANGER/DRESSER ASSEMBLY” Pour connaitre les pièces dont vous aurez besoin, référez-vous à la « Liste des pièces pour l’assemblage de la table à...
SORELLE Assembly / ASSEMBLAGE Step 3 CRIB ASSEMBLY / Étape 3 ASSEMBLAGE DU LIT DE BÉBÉ Fig. 12 Fig. 13 & 1. Slide 1 Wood Dowel (HI) into each end of 2. Put Back Contoured Top(D) to Side Frame (B&C) and then Front &...
SORELLE Assembly / ASSEMBLAGE Step 5 MATTRESS SUPPORT ASSEMBLY Étape 5 ASSEMBLAGE DU SUPPORT DE MATELAS Insert three (3) drawers into changer. Add changing pad (N) to top of organizer. Important : Tighten all bolts before use your Crib. Insérer les trois (3) tiroirs dans la table à langer Ajouter le coussin à...
Page 15
SORELLE Changing Pad Assembly / Assemblage du coussin à langer CLICK! Important : If changing pad and sa fety belt are assembled, make sure warnings are facing up and visibleIf not , reassemble by following the steps below. 1. Locate safety belt bolted to dresser top. Insert safety belt through slit in changing pad from back of pa d.
Page 16
Follow all instructions supplied with the 129/151# Toddler Rail System. NOTE: 129/151#Toddler Rail visit WWW.Sorel lefurniture.com or contact C&T International / Sorelle for more information. Suivre toutes les instructions fournies avec le système de conversion no 129/151. NOTE : le système de conversion no 129/151 n’est pas inclus.
Page 17
Suivre toutes les instructions fournies avec le système de conversion no 228. NOTE : le système de conversion no 228 n’est pas inclus. Contactez le magasin où vous avez acheté ce lit de bébé ou visitez : www.sorellefurniture.com ou communiquez avec C&T International/Sorelle pour information additionnelle.