Replacing Batteries; Important Battery Information - Learning Resources Time Tracker LER 6900 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing Batteries

Change the batteries when the sound becomes garbled or slows
down, or when pressing a button does not trigger a response from
the unit.
You will also need to replace the 2 "LR44" back-up batteries from
time to time. These batteries maintain your clock and time settings
should the regular batteries lose power and/or when you are
replacing the regular batteries.
To replace back-up batteries:
The back-up battery compartment is located inside the
battery compartment (under the AAA batteries). Use a small
Phillips screwdriver to turn the screw on the battery door in a
counterclockwise direction to loosen screw. Remove the screw and
open the door. Remove the 2 LR44 batteries. Insert two new LR44
batteries, being careful to match the + and – ends of the batteries
to the diagram inside the battery compartment. Replace the battery
compartment door and insert the screw. Tighten the screw by using
a small Phillips screwdriver to turn the screw in a clockwise direction
until secure. Do not over tighten the screw.

IMPORTANT BATTERY INFORMATION

Please read and understand these additional battery usage
instructions.
To ensure proper function:
• Battery installation and replacement should be done by an adult
only.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Do not recharge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging (if
removable).
• Only charge rechargeable batteries under adult supervision (if
removable).
• Only use batteries of the same or equivalent type, as recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the product.
• Remove batteries if product is to be inactive for long periods
of time, to avoid leakage.
6

Publicité

Table des Matières
loading

Table des Matières