Getting Started - Learning Resources Time Tracker LER 6900 Mode D'emploi

• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the
leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.

GETTING STARTED

The Time Tracker has 3 modes:
CLOCK – Standard digital
clock.
TIMER – Program exactly
how long you want each
color section to stay lit.
AUTO TIMER – Program
the total amount of time.
The color sections will
automatically divide
into 80% green, 15%
yellow, and 5% red. For
example, if you program
10 minutes as your total
time, the green section
will stay lit for 8 minutes,
the yellow section for
1 minute 30 seconds,
and the red section for
30 seconds.
Before setting the time, please note:
1. If you do not press a button within 30 seconds, you will exit the
programming mode.
2. Press MENU at any time to go back to the previous step.
3. Once you have set the TIMER and/or Auto timer, those times
will remain programmed in the unit until you change them. Once
programmed, you can go directly to STARTING the TIMER.
4. There are audio alerts when the timer switches from green to yellow
to red. Turn the volume all the way down to mute the sound.
Menu
Left
Arrow
Yellow
Section
Green
Section
Reset
Adapter
Outlet
Start
Enter
Battery
Compartment
(underneath)
Display
Screen
Right
Arrow
Red
Section
Volume
Control
Speaker
(behind)
3