Setting The Clock - Philips AJ 3130 Manuel D'utilisation

SETTING THE CLOCK

CLOCK DISPLAY
The time is displayed using the 12-hour clock system.
Important! When setting the clock or alarm time, for accurate
hour and minute adjustment always make sure you press the
HR and MIN buttons separately and not simultaneously.
1. Adjust the clock control to SET TIME.
2. Press and hold down the H or M
R IN
the hours and minutes respectively:
• With your finger held down on H , the hour increases as a
R
digit from 1 to 12.
• With your finger held down on M , the minutes increases
IN
as a digit from 00 to 59.
3. Release the H or M button when you have reached the
R IN
correct time.
4. To safeguard the clock time from being accidentally
adjusted, turn the clock control to CLOCK.
8
All manuals and user guides at all-guides.com
RADIO
You can use the clock radio solely as a radio.
1. Adjust the RADIO switch to
2. Select your wave band using the BAND switch.
3. Use TUNING to find your radio station.
4. Adjust the sound with the VOLUME control.
5. To turn off the radio, adjust RADIO to
button to set and adjust
To improve radio reception:
• For FM, use the antenna built in the power cord. Adjust the
power cord slightly to obtain optimum reception.
• For AM, the set is provided with a built-in antenna which to
function best should be placed on a non-metallic surface
e.g. wood, plastic. Direct the AM antenna by adjusting the
position of your clock radio.
RADIO
.
ON
.
OFF