POWER SUPPLY 1 ALARM RESET / SLEEP Batteries (not included) 1 Open battery door and insert four batteries (preferably PHILIPS POWER LIFE or - stops active alarm for 24 hours alkaline), type R6, UM3 or AA as indicated in the compartment.
Demo mode the correct setting. When the set is first connected to a power supply or has been reset, ‘PHILIPS’ will 3. After both the hours and minutes are set, press SET AL / TIME to confirm the scroll continuously across the demonstration display.
Page 6
CANCELING THE ALARM COMPLETELY As you rotate the set, AJ3136 interacts in the following way. You will : • During alarm activated or repeat alarm mode, press ALARM ON / OFF once. ™ hear a special whirring sound effect Alarm will be switched off completely.
Page 7
No. You will hear a slight rattling sound if you shake the set. This is perfectly normal service centre. as the AJ3136 uses a special contact device inside the set to detect rotation. WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee .
Page 8
Meet Philips at the Internet http://www.philips.com English Français Español Deutsch Nederlands Italiano AJ 3136 Printed in China...