Philips AJ 3130 Manuel D'utilisation page 10

SETTING THE ALARM
Canceling the Alarm Completely
• Before or during the set alarm time goes off, push the
ALARM switch to position.
OFF
™ Alarm indicator disappears from display.
SLEEP
About Sleep
The clock radio has a built-in timer called SLEEP, which
enables the radio to be automatically switched off after 59
minutes. SLEEP allows you to lie back, listen and fall asleep.
Setting and switching off Sleep
1. Check that the clock control is in the CLOCK position.
2. Set RADIO to position.
OFF
3. Set your sleep time by pressing once on the SLEEP button.
• The display shows the sleep period 0: 59.
4. To cancel the sleep function before the sleep period ends,
press / REPEAT ALARM.
SLEEP OFF
Note: - The sleep function does not affect the alarm setting.
- If during SLEEP you have turned down the volume and
you have an alarm set in the radio mode, make sure
you have adjusted the volume loud enough to wake
you up the following day!
10
All manuals and user guides at all-guides.com
MAINTENANCE
• If you do not intend to use the clock radio for a long time,
disconnect the set by withdrawing the plug from the wall
outlet. The battery should also be removed to prevent
chemical leakage which will damage your set.
• To clean your set from fingerprints, dust and dirt, use a
clean and soft damp cloth or chamois leather. Do not use
cleaning products which contain, benzene, thinner, etc. as
these may harm the housing.
SLEEP