Installation - VALBERG 975768 WF 714 A W701T Consignes D'utilisation

B

Installation

Removing the Transit Bolts
1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers
from the rear of the machine. If the bolts are not removed, they may cause heavy
vibration, noise and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the
removal of the transit bolts. The transit bolts should be stored for future use.
NOTE
Remove the transit bolts before using the machine for
the first time. Faults occurring due to the machine being
operated with transit bolts fitted are out ofthe scope of
the warranty.
Using the appliance
4
X
1
4
X
3
5 EN
4
X
2
4