Uline H-7699 Mode D'emploi page 3

5. Place bottom shelf onto bottom clips attached to
side and back panels. Secure to side panels using
four M6 x 12 Phillips head bolts and flange nuts.
(See Figure 5)
Figure 5
6. Remove drawer from desk top. Flip desk top and
place on a smooth, non-marring surface with top
side facing down.
7. Place desk frame onto desk top and secure with
twelve M6 x 12 Phillips head bolts and flange nuts.
(See Figure 6)
Figure 6
PAGE 3 OF 12
ASSEMBLY CONTINUED
8. Set desk top assembly upright and recheck all bolts
and nuts for tightness.
9. Place top shelf onto desk top and secure with six
M6 x 12 Phillips head bolts and flange nuts using a
10 mm wrench and Phillips screwdriver. (See Figure 7)
10. Place middle shelf at desired height on shelf clips
attached to the inside of the side and back panels.
(See Figure 8)
Figure 7
Figure 8
0821 IH-7699