Uline H-7699 Mode D'emploi page 2

1. Using channel lock pliers, attach casters to
threaded inserts underneath base. (See Figure 1)
NOTE: Lock casters for remainder of assembly.
Figure 1
2. Using 10 mm wrench and Phillips screwdriver, install
back, left and right side panels to the base with
nineteen M6 x 12 Phillips head bolts and flange nuts.
(See Figure 2)
Figure 2
PAGE 2 OF 12
ASSEMBLY
3. Using Phillips screwdriver, attach front channel to
side panels with four M6 x 35 Phillips head bolts.
(See Figure 3)
NOTE: Threaded inserts are located in the front
channel.
Figure 3
4. Attach front channel to bottom of base with three
M6 x 12 Phillips head bolts and flange nuts.
(See Figure 4)
Figure 4
0821 IH-7699